1080E28 ENABLEMENT SOLENOID FOR FLOW OF FUEL VAPOUR TO INLET - R+R - Fiat - DOBLO - eLearn

2584281 - 1080E28 enablement solenoid for flow of fuel vapour to inlet - r+r

) Disconnect the battery negative terminal.1. Disconnect the connector on the air inlet chamber, for the fuel vapour recovery pipe.2. Disconnect the electrical connection from the solenoid.

	Name	Connector
2	Fuel vapour recovery solenoid	See L10 FUEL VAPOUR RECOVERY SOLENOID VALVE ( ENGINE )

3. Disconnect connection (3a) on the fuel vapour recovery pipe, then remove solenoid (3b) complete with pipe by releasing from the support bracket.

Refitting ( Removing

) Connect the connection pipe to the solenoid and secure with a band.Connect the fitting to the air intake chamber by means of a band.Connect the solenoid electrical connection.

	Name	Connector
-	Fuel vapour recovery solenoid	See L10 FUEL VAPOUR RECOVERY SOLENOID VALVE ( ENGINE )

Secure the pipes to the support bracket.Connect the battery negative terminal.