1056B15 THROTTLE BODY INTERGRAL WITH MDS - R R - Fiat - DOBLO - eLearn

2584357 - 1056B15 throttle body intergral with mds - r r

) Op. 1048A32 HOSE FROM AIR FILTER TO INTAKE MANIFOLD - R.R.1. Undo the retaining clip and release the system pipe2. Disconnect the electrical connection.

	Name	Connector
2	Integrated throttle body actuator	See N75 INTEGRATED THROTTLE BODY ACTUATOR ( ENGINE )

3. Remove the three bolts (3a) and move bracket (3b) aside.4. Undo the retaining bolt (4a) and remove throttle body (4b).

Refitting ( Removing

) Replace the throttle body with bracket back in its housing and fix it tightening the bolts to the recommended torque.Restore the electrical connection and secure the cooling system pipe using the retaining clip.

	Name	Connector
-	Integrated throttle body actuator	See N75 INTEGRATED THROTTLE BODY ACTUATOR ( ENGINE )

Op. 1048A32 HOSE FROM AIR FILTER TO INTAKE MANIFOLD - R.R.If the throttle body integrated with MDS is replaced, re-initialise the injection-ignition control unit Op. 1056B81 RUN ELECTRONIC IGNITION/INJECTION CONTROL UNIT (SINGLE) SELF-LEARNING PROCEDURE