2585424 - Introduction - PASSENGER COMPARTMENT FRONT SIDE DOORS

The front doors are manufactured using conventional pressing processes and include features designed to ensure passive safety and protection against theft.They are fitted with anti-intrusion bars, waist reinforcements to contain side impacts, hinge reinforcements and panels without sharp corners.The lock includes a new control lever.The door opening/closure lever mechanism is protected by new-design theft-proof partitions that prevent access to the mechanism and the lock from outside.The rear view mirrors can be fitted with an electric or manual adjustment device.The window opening mechanism may be electrically or manually controlled and incorporates a guide cable. The operating buttons are located in the middle of the facia.The window seals incorporate a glass scraper to ensure a good seal against wind noise.Exploded view of front door1, Lock2, Interior door opening link3, Lock barrel4, Exterior handle5, Exterior handle mount6, Door opening limiter7, Interior opening and security handle8, Rear view mirror9, Door frame10, Mirror control cover11, Reflector12, Mirror adjustment device13, Window seal14, Window glass15, Front guide16, Window mechanism17, Rear guide18, Speaker19, Upper door panel20, Front door pouch21, Water guard protection (opal)22, Inner g rab handle23, Theft-proof partition

ADJUSTMENT

The front door is adjusted by means of the hinges, which are bolted to the door and the front pillar. The gap may be aligned and the load on the door seal may be modulated by adjusting one hinge at a time.Adjust the hinge secured to the door to increase or decrease the load on the seal.Adjust the hinge secured to the pillar to align the gaps.Adjustment of the lock striker only allows load on the seal in the rear part of the door to be restored.