2584610 - 2710A32 intermediate drive shaft bearing support - r + r with intermediate drive shaft removed

Removing ( Refitting ) 1. Undo the bolts (1a) and remove the intermediate driveshaft mounting (1b). Refitting ( Removing ) 1. Place the intermediate driveshaft support (1a) back in its housing and secure by tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	FRONT DRIVE SHAFT BEARING MOUNT	M8	[Rear lower crankcase side ] 2.0 ¸ 2.4