2584287 - 1084A42 engine oil pressure warning light switch - r + r

Removing ( Refitting ) Make sure that the ignition key is in the OFF position, then disconnect the negative battery terminal.

	Description	Connector
-	Battery	See A1H BATTERY ( ENGINE )

1. Disconnect the electrical connection from the engine oil pressure warning light switch.

	Description	Connector
1	Insufficient engine oil pressure sensor (switch)	See K030 ENGINE OIL PRESSURE SENSOR (SWITCH)

2. Undo and remove the engine oil pressure warning light switch from the cylinder head. Refitting ( Removing ) 1. Place the engine oil pressure warning light switch in its housing and tighten it to the recommended torque.

	Fastening	Component	dia	Value(daNm)
1	-	INSUFFICIENT ENGINE OIL PRESSURE SWITCH	M14	(Cylinder head side) 2.9 - 3.5

2. Connect the electrical connection to the engine oil pressure warning light switch.

	Description	Connector
2	Insufficient engine oil pressure sensor (switch)	See K030 ENGINE OIL PRESSURE SENSOR (SWITCH)

Connect the negative battery terminal.

	Description	Connector
-	Battery	See A1H BATTERY ( ENGINE )