1084B30 ENGINE OIL FILTER R R - Fiat - DOBLO - eLearn

2584291 - 1084B30 engine oil filter r r

) Make sure that the ignition key is in the OFF position, then disconnect the negative battery terminal.

	Description	Connector
-	Battery	See A1H BATTERY ( ENGINE )

1. Disconnect the electrical connection from the air flow meter.

	Description	Connector
1	Air flow meter	See K041 AIR FLOW METER

2. Loosen the collar and disconnect the air intake sleeve to the turbocharger, air flow meter side.

1. Loosen the band (1a) and disconnect the hose (1b) from the air intake.2. Remove the air filter (2a) complete with air flow meter (2b) releasing it firstly from the pegs underneath and then from the rear fastening.

Undo the bolts (1a) and remove the engine oil filter cartridge heat shield (1b).

1. Undo the cartridge engine oil filter cover (1a) complete with o-ring (1b) and remove it.2. Undo and remove the cartridge engine oil filter.

Refitting ( Removing

) Position the engine oil cartridge filter in its seat.Place the cartridge engine oil filter cover complete with new O-rings in its housing and tighten to the specified torque.

	Fastening	Component	dia	Value(daNm)
-	-	-	-	-

Place the upper protection for the cartridge engine oil filter back in its housing and secure it using the bolts.Position the air filter in its seat with the air flow meter, secure to the rear fastening and then to the underlying pins.Connect the flexible sleeve to the air intake on the crossmember and tighten the retaining collar.Connect the air intake sleeve to the turbocharger, air flow meter side, and tighten the collar.Connect the electrical connection to the air flow meter.

	Description	Connector
-	Air flow meter	See K041 AIR FLOW METER

Connect the negative battery terminal.

	Description	Connector
-	Battery	See A1H BATTERY ( ENGINE )