2584822 - 5040A26 compressor mount - r r

Removing ( Refitting ) Position the vehicle on a lift.Make sure that the ignition key is in the OFF position, then loosen the bolt and disconnect the negative battery terminal.

	Description	Connector
-	Battery	See A1H BATTERY ( ENGINE )

Drain the air conditioning refrigerant circuit    Op. 0010T84 COOLANT FOR AIR CONDITIONING SYSTEM - DEHYDRATE AND RECHARGE.Proceed with the removal    Op. 4450B04 RIGHT FRONT WHEEL - R.R..Proceed with the removal.Proceed with the removal    Op. 1092C10 POWER STEERING AND/OR SELF-LEVELLING SUSPENSION PUMP DRIVE BELT - R + R.Proceed with the removal    Op. 1092G10 SINGLE ENGINE BELT - R.R..Proceed with the removal    Op. 5040A20 AIR CONDITIONING COMPRESSOR - R+R - INCLUDES FLUID LEVEL CHECK AND TOP UP IF NECESSARY.1. Undo the bolts (1a) and remove the air conditioner compressor mount (1b). Refitting ( Removing ) 1. Place the air conditioner compressor mounting (1a) in its housing and secure it tightening the bolts (1b) to the recommended torque.

	Fastening	Component	dia	Value(daNm)
1b	Bolt	COMPRESSOR MOUNT (AC)	M8	(Upper and lower engine crankcase side) 2.3 - 2.8

Proceed with the refitting    Op. 5040A20 AIR CONDITIONING COMPRESSOR - R+R - INCLUDES FLUID LEVEL CHECK AND TOP UP IF NECESSARY.Proceed with the refitting    Op. 1092G10 SINGLE ENGINE BELT - R.R..Proceed with the refitting    Op. 1092C10 POWER STEERING AND/OR SELF-LEVELLING SUSPENSION PUMP DRIVE BELT - R + R.Proceed with the refitting.Proceed with the refitting    Op. 4450B04 RIGHT FRONT WHEEL - R.R..Refill the air conditioning refrigerant circuit    Op. 0010T84 COOLANT FOR AIR CONDITIONING SYSTEM - DEHYDRATE AND RECHARGE.Connect the negative battery terminal.

	Description	Connector
-	Battery	See A1H BATTERY ( ENGINE )

Remove the vehicle from the lift.