5520A12 IGNITION SWITCH ASSEMBLY - R R FOR VERSIONS WITH AIR BAG - Fiat - DOBLO - eLearn

2584907 - 5520A12 ignition switch assembly - r r for versions with air bag

) Disconnect the battery negative terminal.Wait for about 10 minutes before working to allow the Air Bag control unit condensers to drain totally. Op. 5520A14 IGNITION KEY LOCK BARREL - R+R1. Disconnect the electrical connector for the ignition switch.

	Name	Connector
1	Ignition switch	See H001 IGNITION SWITCH

1. Level the surfaces of the heads of the shear bolts securing the ignition switch.2. Use a drill to make a hole of the size shown in the figure in the middle of the bolts securing the ignition.

1. Insert a left hand extractor (1a) in the openings made previously and undo the fixing bolts (1b).

1. Remove the ignition switch.

Refitting ( Removing

) Position the complete ignition switch and secure it using the new shear bolts.Connect the electrical connection.

	Name	Connector
-	Ignition switch	See H001 IGNITION SWITCH

Op. 5520A14 IGNITION KEY LOCK BARREL - R+R Op. 5580C18 AIR BAG MODULE - R+RConnect the negative battery lead and check that the switch is working properly.