2584912 - 5520B10 starter motor - r+r

Removing ( Refitting ) Position the vehicle on a lift.Make sure that the ignition key is in the OFF position, then disconnect the negative battery terminal.

	Description	Connector
-	Battery	See A001 BATTERY

1. Open the protective cover (1a), loosen the nut (1b) and disconnect the starter motor electrical connections (1c).

	Description	Connector
1c	Starter motor	See A020 STARTER MOTOR

2. Undo the bolts (2a) and remove the starter motor (2b). Refitting ( Removing ) 1. Place the starter motor (1a) in its housing and secure it tightening the bolts (1b) to the recommended torque.

	Fastening	Component	dia	Value(daNm)
1b	-	STARTER MOTOR	M8	(Engine crankcase side) 2.3 - 2.8

2. Connect the electrical connections (2a) to the starter motor, secure with the nut (2b) and close the protective cover (2c). Connect the negative battery terminal.

	Description	Connector
-	Battery	See A001 BATTERY

Remove the vehicle from the lift.