2584920 - 5530A10 alternator - r+r

Removing ( Refitting ) Position the car on the ramp.Make sure that the ignition is OFF, then loosen the bolt and disconnect the battery negative (-) terminal.

	Name	Connector
-	Battery	See A1H BATTERY ( ENGINE )

Proceed with removal    Op. 4450B04 RIGHT FRONT WHEEL - R.R.Proceed with removalProceed with removalProceed with removal    Op. 1092C10 POWER STEERING AND/OR SELF-LEVELLING SUSPENSION PUMP DRIVE BELT - R + R1. Undo the nuts (1a) and disconnect the electrical connections (1b) from the alternator.    Op. 1092G10 SINGLE ENGINE BELT - R.R.

	Name	Connector
1b	Alternator	See A010 ALTERNATOR

1. Undo the bolts (1a) and remove the alternator (1b). Refitting ( Removing ) 1. Place the alternator(1a) back in its housing and secure it tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	ALTERNATOR ASSEMBLY	M8	(Support side) 2.3 ÷ 2.8

Connect the electrical connections to the alternator and fix them using the nuts.

	Name	Connector
-	Alternator	See A010 ALTERNATOR

Proceed with refitting    Op. 1092G10 SINGLE ENGINE BELT - R.R.Proceed with refittingProceed with refitting    Op. 1092C10 POWER STEERING AND/OR SELF-LEVELLING SUSPENSION PUMP DRIVE BELT - R + RProceed with refittingConnect the battery negative terminal.Remove the vehicle from the ramp.    Op. 4450B04 RIGHT FRONT WHEEL - R.R.

	Name	Connector
-	Battery	See A1H BATTERY ( ENGINE )