2585286 - 1016E14 single cylinder head valve guides - replace during operation 1016e10

Removing ( Refitting ) 1. Remove the valve guides (1a) using the tool (1b).

	Description	Code
1b	Extractor/fitting tool	1.870.880.000

Refitting ( Removing ) Check that the outer diameter of the valve guides to be fitted corresponds to the recommended figures.

	Measurement		Value
-	Outer diameter (mm)		11.010 ÷ 11.030

	Measurement		Value
-	Outer diameter oversize (mm)		0.05 / 0.10 / 0.25

1. Fit the new valve guides (1a) using the tool (1b).

	Description	Code
1b	Extractor/Fitting tool	1.870.900.900

The valve guides should be fitted after the cylinder head has been heated to a temperature of 80° 100°.

Ream the valve guide bore to the recommended figure.

	Measurement		Value
-	Inner diameter (mm)		6.020 ÷ 6.038