223000156 - 5510C42 DETONATION SENSOR (ONE) - R.R.
Removing
(
Refitting
)
- Position the vehicle on a lift.- Disconnect the negative battery terminal.1. Disconnect the electrical connection (1a), undo the bolt and remove the detonation sensor (1b).| Description | Connector | |
|---|---|---|
| 1a | Detonation sensor -2 | See K050 DETONATION SENSOR - 1 |
Refitting
(
Removing
)
- Place the detonation sensor back in its housing, connect the electrical connection and tighten the new bolt to the recommended torque.| Value daNm | Fastening | Component | dia | |
|---|---|---|---|---|
| - | 2.2 ÷ 2.7 | Bolt (to be replaced) | Detonation sensor | M8 |