2582426 - J04 BACK WINDOW WIPER NOT WORKING
With the ignition on, when the lever on the right of the steering wheel is operated, the rear window wiper does not work or does not reset| Results of the tests | ||||
| 1 | FUSE CHECK | All OK | Problems met | Operation | 
|---|---|---|---|---|
| Check, in order: 
 | Continue to Step 2 | Component defective | Replace the fuse (and search for the cause of the problem) | |
| Connections not correct | Restore connections | |||
| 2 | CHECK ON REAR WINDOW WIPER EARTH | All OK | Problems met | Operation | 
| Check that the rear window wiper motor is connected to earth correctly See E3021 REAR WINDOW WASH/WIPE | Continue to Step 3 | Connections not correct | Restore connections | |
| 3 | CHECK ON REAR WINDOW WIPER MOTOR SUPPLY | All OK | Problems met | Operation | 
| Check that the connection between rear window wiper motor and stalk unit is correct See E3021 REAR WINDOW WASH/WIPE | Continue to Step 4 | Connections not correct | Restore connections | |
| 4 | REARSCREEN WIPER MOTOR CHECK | All OK | Problems met | Operation | 
| Check the operation of the rearscreen wiper motor: 
 | Continue to Step 5 | Fault in motor or reset device | Replace the motor Op. 5050C42 | |
| 5 | CHECK ON REAR WINDOW WIPER CONTROL | All OK | Problems met | Operation | 
| Check that the rear window wiper control o n the stalk unit is working properly Characteristic of working principle 5550A stalk unit | Continue to Step 6 | Switch faulty | Replace the stalk unit Op. 5550A12 | |
| 6 | CHECKING CORRECT OPERATION | All OK | Problems met | Operation | 
| Check that the fault is no longer present | Fault persists | Search for the fault starting from another symptom' | ||