1036H14 VALVE TAPPETS - CHECK CLEARANCE - Fiat - DOBLO - eLearn - 4CarData

2584216 - 1036H14 valve tappets - check clearance

Removing ( Refitting

) Op. 1048A10 AIR FILTER ASSEMBLY - R.R. Op. 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R Op. 1056B87 IGNITION/INJECTION SYSTEM CONTROL UNIT SUPPORT - R.R. Op. 5510C14 IGNITION COIL/S - R+R Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R. Op. 1016A20 SINGLE TAPPET COVER -R.R AND REPLACE GASKET- With the engine cold, use a feeler gauge to check that the valve clearance is within the specified limits with the valves closed.

	Subject	Value
-	Inlet valve clearance in closed position (mm)	0.3

	Subject	Value
-	Exhaust valve clearance in closed position (mm)	0.4

- Rotate the camshaft and check the clearance for all the tappets.

Refitting ( Removing

) Op. 1016A20 SINGLE TAPPET COVER -R.R AND REPLACE GASKET Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R. Op. 5510C14 IGNITION COIL/S - R+R Op. 1056B87 IGNITION/INJECTION SYSTEM CONTROL UNIT SUPPORT - R.R. Op. 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R Op. 1048A10 AIR FILTER ASSEMBLY - R.R.