2584364 - 1072B50 sleeves connecting air capacity box to inlet manifold is - r+r

Removing ( Refitting ) - Disconnect the negative battery terminal.    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.    Op. 1056B60 SINGLE FUEL MANIFOLD PIPE, WITH INJECTORS - R + R    Op. 1056B54 INTAKE AIR PRESSURE/TEMPERATURE SENSOR - R.R.    Op. 1056B44 AIR PRESSURE SENSOR - R + R    Op. 1056B14 THROTTLE CASE - R + R1. Connect the electrical connection to the fuel vapour solenoid valve.
DescriptionConnector
1Fuel vapour recovery solenoid valve    See L010 FUEL VAPOUR RECOVERY SOLENOID VALVE
2. Loosen the collar and disconnect the vacuum pipe from the brake servo.
1. Disconnect the intermediate rapid connector for the fuel vapour pipe.
1. Disconnect the electrical connections for the spark plugs.
DescriptionConnector
1Ignition coil    See A030 IGNITION COIL
2. Undo fastenings (2a) and remove air capacity chamber (2b).
1. Loosen clip (1a) and remove the fuel vapour solenoid (1b) with pipe.
Refitting ( Removing ) - Refit the fuel vapour solenoid with pipe.- Replace the intake manifold in its housing and secure it by tightening the fastenings to the recommended torque.-Collettore di aspirazioneViteM82.3 ÷ 2.81.2 8v1.4 8v-Collettore di aspirazioneDadoM82.3 ÷ 2.81.2 8v1.4 8v1.9 Multijet- Connect the electrical connections for the spark plugs.- Connect the intermediate rapid connector for the fuel vapour pipe.- Connect the vacuum pipe for the brake servo.- Connect the electrical connection to the fuel vapour solenoid valve.    Op. 1056B14 THROTTLE CASE - R + R    Op. 1056B44 AIR PRESSURE SENSOR - R + R    Op. 1056B54 INTAKE AIR PRESSURE/TEMPERATURE SENSOR - R.R.    Op. 1056B60 SINGLE FUEL MANIFOLD PIPE, WITH INJECTORS - R + R    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.- Connect the negative battery terminal.