2584392 - 1032B60 bolt pulley - r r

Removing ( Refitting )     Op. 1048A10 AIR FILTER ASSEMBLY - R.R.    Op. 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R    Op. 1056B87 IGNITION/INJECTION SYSTEM CONTROL UNIT SUPPORT - R.R.    Op. 5510C14 IGNITION COIL/S - R+R    Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.    Op. 1092C10 POWER STEERING AND/OR SELF-LEVELLING SUSPENSION PUMP DRIVE BELT - R + R    Op. 1092B40 AIR CONDITIONER COMPRESSOR/ALTERNATOR DRIVE BELT - R + R    Op. 1092A10 CRANKSHAFT PULLEY - R + R    Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.    Op. 1008B10 FLEXIBLE MOUNTING FOR POWER UNIT FRONT SUPPORT (TIMING SIDE) - REPLACE    Op. 1008A46 TIMING SIDE POWER UNIT RIGID SUPPORT -R.R.    Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT    Op. 1016A20 SINGLE TAPPET COVER -R.R AND REPLACE GASKET- Position an arm lift underneath the engine.1. Remove the threaded cap.2. Unscrew bolt (2a) and remove the toothed driven pulley (2b), apply reaction wrench (2c) to the camshaft splines.
Refitting ( Removing ) - Position the toothed timing drive pulley in its housing and tighten the bolt to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Driven toothed pulleyBoltM121.8 ÷ 2.2 + 55°1.4 8v
- Tighten the threaded plug to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Cap for toothed driven pulley boltPlugM272.5 ÷ 3.01.4 8v
- Remove the hydraulic jack from underneath the engine.    Op. 1016A20 SINGLE TAPPET COVER -R.R AND REPLACE GASKET    Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT    Op. 1008A46 TIMING SIDE POWER UNIT RIGID SUPPORT -R.R.    Op. 1008B10 FLEXIBLE MOUNTING FOR POWER UNIT FRONT SUPPORT (TIMING SIDE) - REPLACE    Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.    Op. 1092A10 CRANKSHAFT PULLEY - R + R    Op. 1092B40 AIR CONDITIONER COMPRESSOR/ALTERNATOR DRIVE BELT - R + R    Op. 1092C10 POWER STEERING AND/OR SELF-LEVELLING SUSPENSION PUMP DRIVE BELT - R + R    Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.    Op. 5510C14 IGNITION COIL/S - R+R    Op. 1056B87 IGNITION/INJECTION SYSTEM CONTROL UNIT SUPPORT - R.R.    Op. 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.