2584724 - 4130B20 power steering pump r r

Removing ( Refitting ) - Position the vehicle on the lift.- Turn the ignition key to the OFF position.- Disconnect the negative battery terminal.

	Description	Connector
	BATTERY	See A001 BATTERY

    Op. 4450B04 RIGHT FRONT WHEEL - R.R.    Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.    Op. 1092C10 POWER STEERING AND/OR SELF-LEVELLING SUSPENSION PUMP DRIVE BELT - R + RPosition a suitable container for collecting the power steering fluid.1. Disconnect the fitting on the high pressure pipe carrying fluid from the power steering pump to the box. Place a container beneath the vehicle and drain the fluid present.2. Use the appropriate tool to remove collar (2a) retaining fluid inlet pipe (2b) from the reservoir.3. Undo the fixing bolts (3a) and remove the bracket (3b). 1. Undo retaining bolts (1a) and remove pulley (1b). 1. Undo the bolts (1a) and remove the power steering pump (1b) fromthe vehicle. Refitting ( Removing ) 1. Position the power steering pump (1a) in its seat and tighten the three fixing bolts (1b) to the recommended torque.

	Fastening	Component	dia	Value (daNm)
1b	Bolt	POWER STEERING PUMP	M8 X 1.25	2.2

1. Position the pulley (1a) in its seat and tighten the three fixing bolts (1b) to the recommended torque.

	Fastening	Component	dia	Value (daNm)
1b	Bolt	POWER STEERING PUMP DRIVE PULLEY	M8	2.5

1. Position the bracket (1a) in its seat and tighten the fixing bolts (1b) to the recommended torque.

	Fastening	Component	dia	Value (daNm)
1b	Bolt	POWER STEERING PUMP	M8 X 1.25	2.2

    Op. 1092C10 POWER STEERING AND/OR SELF-LEVELLING SUSPENSION PUMP DRIVE BELT - R + R    Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.    Op. 4450B04 RIGHT FRONT WHEEL - R.R.    Op. 0010T71 POWER STEERING FLUID CHECK LEVEL AND TOP UP IF NECESSARY- Connect the negative battery terminal.

	Description	Connector
	BATTERY	See A001 BATTERY

- Remove the vehicle from the lift.