223000120 - 1028H12 SET OF PISTONS WITH CONNECTING RODS - R.R WITH CYLINDER HEAD/S REMOVED

Removing ( Refitting ) 1. Fit engine mount crossmember (1a) with blocks (1b) and link (1c).

	Description	Code	Function
1a	Crossmember	1.870.595.000	Power unit support

	Description	Code	Function
1b	Support blocks	1.870.650.000	Power unit support

    Op. 0010T12 ENGINE OIL AND FILTER - REPLACE    Op. 2110A60 MANUAL GEARBOX/ENGINE COUPLING BRACKET - R+ROp. 4410D17 REINFORCEMENT FOR FRONT SUSPENSION CROSSMEMBER - R.R.    Op. 1020A20 CRANKCASE OIL SUMP - R + R CLEAN SEALS FOR SEALANT APPLICATION    Op. 1084B28 ENGINE OIL INTAKE PUMP - R + R WITH CRANKCASE SUMP REMOVED1. Undo the bolts (1a) and remove the connecting rod cap (1b).- Repeat the operation for the remaining pistons. - Lower the lift.- Remove the pistons complete with connecting rods. Refitting ( Removing ) 1. Use the tool (1a) and fit the piston (1b) in the cylinder liner/bore. - Repeat the operation for the remaining pistons.- Position the connecting rod caps and secure them by tightening the fixing bolts to the recommended torque.

	Value daNm	Fastening	Component	dia
-	1.9 ÷ 2.1 + 40° +/- 2°	Bolt	Connecting rod big end bearing caps	M8

    Op. 1084B28 ENGINE OIL INTAKE PUMP - R + R WITH CRANKCASE SUMP REMOVED    Op. 1020A20 CRANKCASE OIL SUMP - R + R CLEAN SEALS FOR SEALANT APPLICATIONOp. 4410D17 REINFORCEMENT FOR FRONT SUSPENSION CROSSMEMBER - R.R.    Op. 2110A60 MANUAL GEARBOX/ENGINE COUPLING BRACKET - R+R    Op. 0010T12 ENGINE OIL AND FILTER - REPLACE