1040A70 SUBMERGED PUMP ASSEMBLY COMPLETE WITH LEVEL GUAGE CONTROL - R + R - Fiat - DOBLO - eLearn

2584226 - 1040A70 submerged pump assembly complete with level guage control - r + r

) Disconnect the battery negative terminal.1. Acting on the levers (1a), lift up the rear seat cushion (1b) and move the floor covering (1c) aside to gain access to the fuel pump flap (1d).

1. Undo th fixing bolts (1a) and remove the protective cover (1b).2. Disconnect the electrical connection from the level gauge.

	Name	Connector
2	Fuel pump and sender unit	See N040 FUEL PUMP AND LEVEL GAUGE

3. Disconnect the rapid attachment for the supply pipe.4. Using the tool (4a), undo the ring nut (4b), then remove the fuel pump (4c) complete with gauge.

	Name	Country
4a	Key	1.870.736.000

Refitting ( Removing

) Position the fuel pump in the special housing in the tank.Fit the lock collar and use the tool to tighten to torque.

	Name	Country
-	Key	1.870.736.000

	Fastening	Component	Ø	Value(daNm)
-	-	SUBMERGED FUEL PUMP RING NUT	-	0.6

Replace the gasket under the fuel pump and take care, when refitting, to check that the gasket is correctly positioned in order to ensure the seal.

Connect the rapid attachment for the fuel supply pipe.Connect the electrical connection to the electric pump and level gauge.

	Name	Connector
-	Fuel pump and sender unit	See N040 FUEL PUMP AND LEVEL GAUGE

Tighten the fuel pump protective cover retaining bolts.Refit the floor covering.Lower the rear seat cushion.Connect the battery negative terminal.