2584312 - 1088D24 rigid pipe for coolant inlet to water pump - r + r

Removing ( Refitting )     Op. 0010T20 ENGINE COOLANT - CHANGE1. Loosen the bands and disconnect the sleeve from the water pump rigid inlet pipe. 1. Loosen the bands and disconnect the sleeve from the water pump rigid inlet pipe.2. Undo the bolt (2a) and remove the water pump inlet pipe (2b).- Remove the gasket. Refitting ( Removing ) - Place the water pump rigid inlet pipe, complete with gasket, in position and secure it using the bolt.- Connect the sleeves to the water pump rigid inlet pipe.    Op. 0010T20 ENGINE COOLANT - CHANGE