2584243 - 1056B51 cam angle sensor r + r

Removing ( Refitting )

If the cam angle sensor is replaced, run the following self-learning procedure.Start up the engine without pressing the accelerator pedal with an engine temperature greater than or equal to 20 °C and idle the engine for 10 seconds

- Disconnect the negative battery terminal.1. Disconnect electrical connection (1a), unscrew the bolts and remove cam angle sensor (1b).

	Description	Connector
1a	Timing sensor	See K047 TIMING SENSOR.

Refitting ( Removing ) - Refit the cam angle sensor in its seat, secure with the bolt and connect the electrical connection.- Connect the negative battery terminal.