2584307 - 1088C14 water pump - r + r with drive belt removed
Removing
(
Refitting
)
Op. 0010T20 ENGINE COOLANT - CHANGE1. Undo the bolts fixing the water pump to the crankcase.2. Remove the water pump from the crankcase.
Refitting
(
Removing
)
- Clean the residues of sealant from the mating surfaces between the engine block and the water pump.- Apply a strip of silicone sealant to the contact surfaces between the water pump and the engine block.- Position the water pump in its housing and secure it tightening the bolts to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Water pump | Bolt | M8 | 0.8 ÷ 1.0 | 1.2 8v1.4 8v |