2584438 - 1088C40 thermostat- r + r

Removing ( Refitting )     Op. 0010T20 ENGINE COOLANT - CHANGE- Disconnect the negative battery terminal.    See A001 BATTERY1. Loosen bands and disconnect sleeves (1a) and (1b) from the thermostat.2. Disconnect the degassing pipe rapid connector.3. Disconnect the electrical connection for the air temperature sensor.

	Description	Connector
3	Engine coolant temperature sensor/sender unit	See K036 ENGINE COOLANT TEMPERATURE SENSOR/SENDER UNIT

4. Undo the bolts and remove the thermostat.- Remove the gasket. Refitting ( Removing ) - Place the thermostat in position and secure it tightening the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Thermostat	Bolt	M6	0.8 ÷ 1.0	1.2 8v1.4 8v

- Connect the electrical connection for the coolant temperature sensor.    See K036 ENGINE COOLANT TEMPERATURE SENSOR/SENDER UNIT- Connect the degassing pipe rapid connector.- Connect the hoses to the thermostat using the bands.- Connect the negative battery terminal.    See A001 BATTERY    Op. 0010T20 ENGINE COOLANT - CHANGE