2125C14 GEAR HAND-LEVER MOUNT BRACKET (ONE)- R R - Fiat - DOBLO - eLearn

2584595 - 2125C14 gear hand-lever mount bracket (one)- r r

) Working from inside the vehicle, proceed as described below. Op. 7040A60 UNDERDASHBOARD TRIM - R.R. Op. 2125C16 GEAR HAND LEVER SUPPORT - R.R.Move the two front seats forwards and pull the handbrake lever until it is in the end of travel position.1. Remove the coin holder (1a) and the protective cover (1b) behind the handbrake lever.2. Undo the fixing bolts (2b) and move the tunnel cover (2b) back.

1. Unscrew the retaining bolts2. Remove the two shields for the heater unti air vent.

1. Unscrew the retaining bolts2. Remove the gear lever mounting bracket.

Refitting ( Removing

) Fit the gear lever mounting bracket and tighten the fixing bolts to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	GEAR CONTROL LINK MOUNT BRACKET	M8	2.5

Fit the two heater unit air vent shields.Fit the tunnel cover and secure it using the fixing bolts.Fit the coin holder and the protective cover behind the handbrake lever.Return the front seats to their original position and place the handbrake lever in the rest position. Op. 2125C16 GEAR HAND LEVER SUPPORT - R.R. Op. 7040A60 UNDERDASHBOARD TRIM - R.R.