1084A42 ENGINE OIL PRESSURE WARNING LIGHT SWITCH - R + R - Fiat - DOBLO - eLearn

2584287 - 1084A42 engine oil pressure warning light switch - r + r

) Position the vehicle on a lift.Disconnect the negative battery terminal.Raise the lift. Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.1. Undo the retaining bolt.2. Move the rpm sensor connection bracket aside.

1. Disconnect the electrical connection for the switch.

	Description	Connector
1	Insufficient engine oil pressure sensor (switch)	See K030 ENGINE OIL PRESSURE SENSOR (SWITCH)

2. Undo and remove the engine oil pressure warning light switch.

Refitting ( Removing

) Position the engine oil pressure warning light switch and tighten it to the recommended torque.

	Fastening	Component	dia	Value(daNm)
-	-	INSUFFICIENT ENGINE OIL PRESSURE SWITCH	M14 X 1.5	3

Connect the electrical connection.

	Description	Connector
-	Insufficient engine oil pressure sensor (switch)	See K030 ENGINE OIL PRESSURE SENSOR (SWITCH)

Tighten the bolt and secure the rpm sensor bracket. Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.Lower the lift.Connect the negative battery terminal.Remove the vehicle from the lift.