J02 WINDSCREEN WIPERS NOT WORKING - Fiat - DOBLO - eLearn

2582424 - J02 WINDSCREEN WIPERS NOT WORKING

With the ignition on, when the stalk unit's right-hand lever is operated, the windscreen wiper does not work

1	FUSE CHECK	All OK	Problems met	Operation
		Results of the tests
	Check, in order: Windscreen wiper fuse on dashboard unit Connection with stalk unit See E3020 WINDSCREEN WASH/WIPE	Continue to Step 2	Component defective	Replace the fuse (and search for the cause of the problem)
		Continue to Step 2	Connections not correct	Restore connections
2	CHECK ON WINDSCREEN WIPER SUPPLY	All OK	Problems met	Operation
	Check the continuity of the windscreen wiper motor supply cables: with the ignition in the ON position and the windscreen wiper lever at the 1st or 2nd speed the terminals should show the battery voltage See E3020 WINDSCREEN WASH/WIPE	Continue to Step 3	Cables short-circuited or open circuit	Restore the correct connections See E3020 WINDSCREEN WASH/WIPE
		Continue to Step 3	Jets obstructed or damaged	Steering column switch unit broken Op. 5550A12
3	CHECK ON WINDSCREEN WIPER MOTOR EARTH	All OK	Problems met	Operation
	Check that the windscreen wiper motor is connected to earth correctly	Continue to Step 4	Earth connection inefficient	Restore connection See E3020 WINDSCREEN WASH/WIPE
4	WINDSCREEN WIPER MOTOR CHECK	All OK	Problems met	Operation
	Check the operation of the windscreen wiper motor: in particular, check the zeroing device.	Continue to Step 5	Fault in motor or reset device	Replace the motor Op. 5050B38
5	CHECKING STEERING COLUMN SWITCH UNIT	All OK	Problems met	Operation
	Check that the stalk unit is working properly Characteristic of working principle 5550A stalk unit	Continue to Step 6	Switch faulty	Replace the stalk unit Op. 5550A12
6	CHECKING CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present		Fault persists	Search for the fault starting from another symptom'