| | Results of the tests |
| 0 | PRELIMINARY CHECKS | All OK | Problems met | Operation |
|---|
| Check
that the tank contains less than 5 litres of fuel | Continue to Step 1 | - | |
| 1 | INSTRUMENT PANEL CONTROL UNIT TEST
USING EXAMINER TESTER | All OK | Problems met | Operation |
|---|
| Carry
out active diagnosis on the fuel reserve warning lightThe warning light should flash for a few seconds | Continue to Step 2 | Warning light does not
flash | Replace
the instrument panel Op. 5560B11 |
| 2 | CHECK ELECTRICAL CIRCUIT | All OK | Problems met | Operation |
|---|
| Check
the wiring between the fuel level sensor and the Body Computer See E4010 INSTRUMENT PANEL | Continue to Step 3 | Wires broken or s.c. | Renew the wiring See E4010 INSTRUMENT PANEL |
| 3 | FUEL LEVEL SENSOR CHECK | All OK | Problems met | Operation |
|---|
| Check
the operation of the fuel level sensor. | Continue to Step 4 | Sensor not working | Replace the fuel pump/level
sensor assembly Op. 1040A70 |
| 4 | CHECKING ELECTRICAL CIRCUIT | All OK | Problems met | Operation |
|---|
| Check
the wiring between the Body Computer and the instrument panel See E4010 INSTRUMENT PANEL | | Wires in o.c. or s.c. | Renew the wiring See E4010 INSTRUMENT PANEL Search for the fault starting
from another symptom' |
| Wires in o.c. or s.c. | Replace the Body Computer Search for the
fault starting from another symptom' |