2582488 - P01 FRONT DOOR CLOSING DEFECTIVE

When the central locking is operated using either the key or the remote control or from the inside using the safety knob, one of the front doors does not close properly.
If one door does not close properly, all four doors may close and then re-open after a few moments when the door lock is operated.
Results of the tests
1CHECK LOCK STRIKERAll OKProblems metOperation
Check the lock striker is properly secured.Continue to Step 2Striker fixed incorrectlyRefix the striker correctly Op.   7005A10 
2DOOR OPERATION CHECKAll OKProblems metOperation

Check that the door opens / closes properly using the:

  • Spanner
  • Outer handle
  • Interior handle
Continue to Step 3Key faultyContinue to Step 5
Outer handle faultyContinue to Step 3
Interior handle faultyContinue to Step 4
3OUTER HANDLE CHECKAll OKProblems metOperation
Check the condition of the outer handleContinue to Step 5Outer handle faultyReplace the outer handle Op.   7005C11 
4INTERIOR HANDLE CHECKAll OKProblems metOperation
Check the condition of the interior handleContinue to Step 5Interior handle faultyReplace the interior handle Op.   7005C53 
5LOCK FASTENING CHECKAll OKProblems metOperation
Check that the lock is correctly fastened to the doorContinue to Step 6Lock fastening faultyRefit the lock correctly Op.   7005N21 
6LINKAGE CHECKAll OKProblems metOperation
Check that the control and/or safety linkage is correct attached to the lock and to the handleContinue to Step 7Control linkage attachment not correctRestore the correct control linkage attachment Op.   7005C51 
Safety linkage attachment not correct Restore the correct safety linkage attachment Op.   7005C53 
7CHECK ON CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer presentFault persistsSearch for the fault starting from another symptom'