2582490 - P10 CENTRAL LOCKING / NOT WORKING

When the central door locking is operated with the key or remote control (if present), the doors do not open and do not close

		Results of the tests
0	CHECKING FUSES	All OK	Problems met	Operation
	Check condition of fuses:	Continue to Step 1	Fuse blown	Replace the fuse (then search for the cause of the problem)
1	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Verify: That there are no faults in the Body Computer Plausibility of parameters	Continue to Step 2	Error detected in Body Computer	Continue according to the instructions for the diagnostic equipment
			Incoherent parameters	Continue according to the instructions for the diagnostic equipment
2	ACTIVE DIAGNOSIS WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Carry out active diagnosis of central door locking	Continue to Step 3	Central door locking not working	Replace the Body Computer Op.   5505A32
3	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present		Fault persists	Replace the Body Computer Op.   5505A32  Search for the fault starting from another symptom'