1040A74 INERTIA SWITCH FOR ELECTRIC PUMP SUPPLY CIRCUIT R + R - Fiat - DOBLO - eLearn

2584228 - 1040A74 inertia switch for electric pump supply circuit r + r

) Ensure that the ignition key is in the stop position, then disconnect the battery negative terminal.

	Name	Connector
-	Battery	See A1B BATTERY ( BATTERY POSITIVE )

1. Undo the bolts (1a) and remove the front runningn board (1b).

1. Disconnect the electrical connection from the inertia switch.

	Name	Connector
1	Inertia switch	See I50 INERTIA SWITCH ( REAR )

2. Undo the bolts (2a) and remove the inertia switch (2b).

Refitting ( Removing

) Place the inertia switch back in its housing and fix it using the bolts.Connect the electrical connection to the inertia switch.Place the front running board back in its housing and secure it using the bolts.Connect the negative (-) battery terminal.