2584672 - 3330D30 vacuum pump - r+r
Removing
(
Refitting
)
1. Loosen the band and disconnect the brake servo vacuum pipe from the vacuum unit.2. Undo the bolts (2a) and remove the vacuum unit (2b) complete with O-ring.Remove the seal.
Refitting
(
Removing
)
Place the gasket back in its housing.Place the vacuum unit, complete with O-Ring, back in its housing and secure it tightening the bolts to the recommended torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | BRAKE SERVO VACUUM PUMP | M8 | (Cylinder head side) 2.3 ÷ 2.8 |