1004D10 POWER UNIT (MANUAL GEARBOX), REMOVED, REMOVE AND RE-BUILD - Fiat - DOBLO - eLearn

) 1. Disconnect the electrical connection from the speedometer sensor.

	Name	Connector
1	Speedometer sensor	See K84 SPEEDOMETER SENSOR ( ENGINE )

2. Disconnect the electrical connection from the starter motor.

	Name	Connector
2	Starter'' motor	See A020 STARTER MOTOR

3. Undo the bolts (3a) and remove the starter motor (3b).

1. Undo the bolts (1a) and the nut (1b), then remove the manual gearbox (1c).

) 1. Place the manual gearbox (1a) back in its housing and secure it tightening the bolts (1b), (1c) and the nut (1d) to the recommended torque.

One of the upper bolts fixing the gearbox also fastens the turbocharger vane position actuator solenoid valve mounting bracket and the pipes.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	MANUAL GEARBOX	M12	(Crankcase side) 7.2 ÷ 8.8

	Fastening	Component	Ø	Value(daNm)
1c	Bolt	MANUAL GEARBOX	M10	(Engine oil sump side) 5.0 ÷ 6.0

	Fastening	Component	Ø	Value(daNm)
1d	Nut	MANUAL GEARBOX	M12	(Crankcase side) 7.2 ÷ 8.8

1. Place the starter motor (1a) back in its housing and fix it tightening the bolts (1b) to the recommended torque.

The upper starter motor fixing bolts also secure one of the electrical wiring mounting brackets.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	STARTER MOTOR	M8	(Gearbox side) 2.4 ÷ 3.0

2. Connect the electrical connections to the starter motor.3. Connect the electrical connection to the speedometer sensor.