1084A42 ENGINE OIL PRESSURE WARNING LIGHT SWITCH - R + R - Fiat - DOBLO - eLearn

2584287 - 1084A42 engine oil pressure warning light switch - r + r

) Position the vehicle on a lift.Make sure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Description	Connector
-	Battery	See A1B BATTERY ( BATTERY POSITIVE )

Proceed with the removal Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R..1. Disconnect the electrical connection from the engine oil pressure warning light switch.

	Description	Connector
1	Insufficient engine oil pressure sensor (switch)	See K030 ENGINE OIL PRESSURE SENSOR (SWITCH)

2. Undo and remove the engine oil pressure warning light switch.

Refitting ( Removing

) Place the engine oil pressure warning light switch in its housing and tighten it to the recommended torque.

	Fastening	Component	dia	Value(daNm)
-	-	INSUFFICIENT ENGINE OIL PRESSURE SWITCH	M14	(Engine crankcase side) 2.7 - 3.3

Connect the electrical connection to the engine oil pressure warning light switch.Proceed with the refitting Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R..Connect the negative battery terminal (-).Remove the vehicle from the lift.