5040A26 COMPRESSOR MOUNT - R R - Fiat - DOBLO - eLearn - 4CarData

2584822 - 5040A26 compressor mount - r r

Removing ( Refitting

) Position the vehicle on a lift.Make sure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Description	Connector
-	Battery	See A1B BATTERY ( BATTERY POSITIVE )

Drain the air conditioning system Op. 5040A10 AIR CONDITIONING REFRIGERANT CIRCUIT - DRYING AND REPRESSURIZING.Proceed with the removal Op. 4450B04 RIGHT FRONT WHEEL - R.R..Proceed with the removal Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R..Proceed with the removal Op. 1092G10 SINGLE ENGINE BELT - R.R..Proceed with the removal Op. 1048B14 AIR SUPPLY HOSE BETWEEN TURBOCHARGER AND HEAT EXCHANGER - REPLACE.Proceed with the removal Op. 5040A20 AIR CONDITIONING COMPRESSOR - R+R - INCLUDES FLUID LEVEL CHECK AND TOP UP IF NECESSARY.1. Undo the bolts (1a) and remove the air conditioner compressor mount (1b).

Refitting ( Removing

) 1. Place the air conditioner compressor mounting (1a) in its housing and secure it tightening the bolts (1b) to the recommended torque.

	Fastening	Component	dia	Value(daNm)
1b	Bolt	COMPRESSOR MOUNT (AC)	M10	(Engine crankcase side) 4.5 - 5.5

Proceed with the refitting Op. 5040A20 AIR CONDITIONING COMPRESSOR - R+R - INCLUDES FLUID LEVEL CHECK AND TOP UP IF NECESSARY.Proceed with the refitting Op. 1048B14 AIR SUPPLY HOSE BETWEEN TURBOCHARGER AND HEAT EXCHANGER - REPLACE.Proceed with the refitting Op. 1092G10 SINGLE ENGINE BELT - R.R..Proceed with the refitting Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R..Proceed with the refitting Op. 4450B04 RIGHT FRONT WHEEL - R.R..Refill the air conditioning system Op. 5040A10 AIR CONDITIONING REFRIGERANT CIRCUIT - DRYING AND REPRESSURIZING.Connect the negative battery terminal (-).Remove the vehicle from the lift.