1008B30 GEARBOX SIDE SUPPORT FLEXIBLE MOUNTING(S) - REPLACE - Fiat - DOBLO - eLearn

) Position the vehicle on the ramp.Proceed with the removal Op. 5530B10 BATTERY - R+R.Proceed with the removal Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R..Proceed with the removal Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R..Position a hydraulic lift under the power unit.1. Undo the nut fixing the gearbox side support flexible mounting to the rigid support.

1. Undo the bolts securing the gearbox side flexible block to the body.2. Remove the gearbox side flexible mounting.

) 1. Place the flexible mounting for the gearbox side support (1a) back in its housing and tighten the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	GEARBOX SIDE RUBBER MOUNT	M8	(Bodyshell side) 2.3 ÷ 2.8

1. Tighten the nut fixing the gearbox side flexible mounting to the rigid support to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1	Nut	POWER UNIT GEAR BOX END RIGID MOUNT	M12	(Flexible mounting side) 8.1 ÷ 9.9

Remove the hydraulic lift from underneath the power unit.Proceed with the refitting Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R..Proceed with the refitting Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R..Proceed with the refitting Op. 5530B10 BATTERY - R+R.Remove the car from the ramp.