| | Results of the tests |
| 0 | PRELIMINARY CHECKS | All OK | Problems met | Operation |
|---|
| Check
that the clutch releases properly: with the engine running, press
the clutch pedal and engage a gear | Continue to Step 1 | The gearbox always grates
in any gear: the clutch does not disengage | See table E01 CLUTCH NOT RELEASING CORRECTLY |
| 1 | CHECK ON SYNCHRONIZER RINGS | All OK | Problems met | Operation |
|---|
| Overhaul
the gearbox Op. 2110B20 . In particular, check the synchronizer
rings: they should not show signs of wear on the internal surfaces. | Continue to Step 2 | Seals worn | Replace the synchronizers Op. 2110B20 |
| 2 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
|---|
| Check
that the fault is no longer present | | Fault persists | Search for the fault starting from another symptom' |