2584302 - 1088B32 engine cooling radiator support beam - r r

Removing ( Refitting ) Position the vehicle on a lift.    Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.Attach the radiator to the body shell using cord or metal wireRaise the ramp.1. Undo the bolts (1a) and (1b) fixing the crossmember to the bodyshell and to the plastic side shields.2. Und the bolts fixing the crossmember to the front bumper.Release the rubber mountings retaining the radiator and the windscreen washer fluid reservoir from the crossmember.3. Remove the engine radiator support beam.
If the vehicle is equipped with a power assisted steering pump, the rigid pipes for the power assisted steering fluid cooling coil must be released from the fastenings on the crossmember.
Refitting ( Removing ) Position the crossmember, fastening the rubber mountings for the radiator and the windscreen washer fluid reservoir.Tighten the fixing bolts to the bodyshell, the front bumper and the wheel arch liners.Tighten the bolts fixing the crossmember to the bodyshell to torque.

FasteningComponentØValue(daNm)
-BoltCOOLANT RADIATOR SUPPORT BEAMM105.6
    Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.Lower the lift.Remove the cord or wire securing the radiator to the body.Remove the car from the lift.