2582360 - 7040E INTERIOR COURTESY LIGHT SYSTEM

LOCATION OF COMPONENTS ON VEHICLE
1 Front courtesy light

Pin - out

Connector A
PinDescription
relayEarth
relayDirect battery supply
3Timed control

OPERATING PRINCIPLES

The front courtesy light has two timing strategies for the courtesy lights:

1 Vehicle entry stage:

  • When the front doors are unlocked, using the key or the RF remote control, an initial courtesy light timer is activated for about 15 seconds.
  • When one of the side doors is opened, a second courtesy light timer starts for a period of around 3 minutes, after which the courtesy light goes out and remains off until the next time one of the doors is opened again.
  • If the door is closed during these 3 mins., a third timer comes on for 7s. This is interrupted if the panel ignition key is turned ON.

2 Vehicle exit stage:

  • After having extracted the ignition key from the ignition switch, an initial period of 7 seconds is activated (if no more than two minutes have elapsed since the vehicle is switched off, after the opening of the one of the side doors, a second period of 3 minutes is activated.
  • When the door is closed, as long as it takes place during this time interval, a third period of around 7 seconds is activated.
FRONT COURTESY LIGHT
1 Left courtesy light switch.2 Right courtesy light switch3 Left courtesy light4 Right courtesy light

OPERATING PRINCIPLES

SWITCH POSITION A and B
A. Left courtesy light switchB. Right courtesy light switch1 Pos. 1 Courtesy light (door light)2 Pos. 0 Courtesy light (off)3 Pos. 2 Courtesy light (on)4 Pos 0 Spot (off)5. Pos. 1 Left spot (on)6. Pos. 2 Right spot (on)

OPERATING PRINCIPLES

WIRING DIAGRAM
1 Courtesy light switch2 Left spot3 Right spot4 Spot switch5. Switch on door pillar