2585093 - 7020N21 SLIDING SIDE DOOR CENTRAL LOCKING MOTOR/LOCK ASSEMBLY, LEFT OR RIGHT - R.R WITH DOOR PANEL REMOVED

Removing ( Refitting )     Op. 7020D18 EXTERIOR HANDLE WITH LOCK BARREL - R+R1. Disconnect the central locking electrical connector.

	Name	Connector
1	Left rear door lock geared motor	See N55 LEFT REAR DOOR LOCK GEARED MOTOR

	Name	Connector
1	Right rear door lock geared motor	See N56 RIGHT REAR DOOR LOCK GEARED MOTOR ( RIGHT DOOR )

2. Undo the fixing bolts (2a) and remove the lock gearmotor (2b) from its seating, complete with flexible control cables. 1. Open the safety clips (1a) and disconnect the flexible control cables (1b) for opening/closing the door via the outer handle. 1. Prise off and remove the flexible control cable for opening/closing the door via the inner handle. Refitting ( Removing ) Check that the flexible control cables for opening/closing the door via the outer and inner handle are not damaged.Fit, in their seatings, the flexible control cables for opening/closing the door.Fit the door locking gearmotor complete with flexible control cables and tighten the bolts to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	SLIDING./ SIDE DOOR LOCK. MOTOR ASSEMBLY .	M8	1.6

Connect the central locking electrical connector.

	Name	Connector
-	Left rear door lock geared motor	See N55 LEFT REAR DOOR LOCK GEARED MOTOR

	Name	Connector
-	Right rear door lock geared motor	See N56 RIGHT REAR DOOR LOCK GEARED MOTOR ( RIGHT DOOR )

    Op. 7020D18 EXTERIOR HANDLE WITH LOCK BARREL - R+R