2585119 - 7035A50 windscreen glass clean edges and sand small abrasions

1. Using a suitable tool, cut and level the bead of sealant on the windscreen so as to reduce its thickness to a minimum without removing it completely.2. Carefully clean with compressed air the printed area around the edge of the window and thoroughly degrease with heptane.

Take care not to damage the black screen printing around the edge of the window.

Check that the window is undamaged.If bonding takes place 60 minutes after the cutting and levelling of the bead of sealant, the surface of the pressed seal must be treated with the special activator and it is necessary to wait for 15 minutes before fixing the glass.

	Type	Component	Name	Qty.
-	PRIMER	WINDSCREEN GLASS SEALING STRIP	-	-