223000118 - 1008b30 GEARBOX SIDE SUPPORT FLEXIBLE MOUNTING(S) - REPLACE

Removing ( Refitting ) Place the car on the ramp.Disconnect the battery negative terminal.

	Name	Connector
-	Battery	See A001 BATTERY

    Op. 5530B10 BATTERY - R+R    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R.Place an arm lift beneath the engine to support it while removing the gearbox side flexible mounting.1. Unscrew the nut securing the flexible block to the engine mount.2. Undo the bolts fixing the flexible mounting to the bodyshell.3. Remove the flexible mounting from the engine compartment. Refitting ( Removing ) Fit the flexible block and tighten the bolts securing it to the body to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	GEARBOX SIDE RUBBER MOUNT	M8	(Gearbox side) 2.5

Tighten the nut securing the flexible block to the engine mount to torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	GEARBOX SIDE RUBBER MOUNT	M12 x 1.25	(Rigid support) 9

Remove the arm lift from underneath the power unit.    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R.    Op. 5530B10 BATTERY - R+RConnect the battery negative terminal.

	Name	Connector
-	Battery	See A001 BATTERY

Remove the car from the ramps.