| | Results of the tests |
| 1 | STEERING COLUMN FIXING CHECK | All OK | Problems met | Operation |
|---|
| Check
the fixing of the steering column: it should not be slack | Continue to Step 2 | Steering column slack | Restore the correct fastening |
| 2 | END FLOAT CHECK | All OK | Problems met | Operation |
|---|
| Check
the end float of the steering column: it should not be excessive | Continue to Step 3 | Clearance excessive | Restore the correct clearance,
fixing the pin. If necessary, replace the steering Op. 4120A10 |
| 3 | SPIDER CLEARANCE CHECK | All OK | Problems met | Operation |
|---|
| Check
that there is no spider clearance for the steering column rod | Continue to Step 4 | Spider clearance | Replace the rod Op. 4110B10 |
| 4 | COLLAPSIBLE ROD CLEARANCE CHECK | All OK | Problems met | Operation |
|---|
| Check
that there is no clearance for the collapsible rod | Continue to Step 5 | Rod clearance | Replace the rod Op. 4110B10 |
| 5 | RACK CLEARANCE CHECK | All OK | Problems met | Operation |
|---|
| Check
the rack clearance, turning the steering to the end of travel position:
the clearance should not be too large | Continue to Step 6 | Excessive clearance at
the rack bushes | Replace the steering box Op. 4120A10 |
| 6 | STEERING ROD CLEARANCE CHECK | All OK | Problems met | Operation |
|---|
| Check
the clearance of the steering rods: it should not be too large | Continue to Step 7 | Clearance excessive | Replace the steering Op. 4120A10 |
| 7 | STEERING BOX FIXING CHECK | All OK | Problems met | Operation |
|---|
| Check
the fixing of the steering box: it should not be slack | Continue to Step 8 | Fixing slack | Tighten the pins to torque |
| 8 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
|---|
| Check
that the fault is no longer present | | Fault persists | Search for the fault starting from another symptom' |