2584621 - 3310A30 FRONT BRAKE CALIPER (one) - R.R.

Removing ( Refitting ) Position the vehicle on the lift.Remove one front wheel, proceed as follows    Op. 4450B02 LEFT FRONT WHEEL - R.R..1. Remove clip (1a) and use tool (1b) to unscrew brake pipe fitting (1c).

	Description	Code
1b	Box spanner for brake connector	1.856.132.000

2. Release the brake pipe rubber retainer (2a) from its seat (2b) on the shock absorber.3. Remove the clip fixing the brake caliper to the bracket.4. Undo the bolts (4a), then remove the brake caliper assembly (4b). Refitting ( Removing ) Fit the front brake caliper on the disc.Secure the brake caliper by tightening both rear bolts.

	Fastening	Component	dia	Value(daNm)
-	Bolt	FRONT DISC BRAKE CALIPERS COMPLETE	M10 X 1.25	2.5 ÷ 3

Whenever the brake calipers are removed, replace the bolts with new ones.

Fit the calliper spring and engage correctly.Tighten the hose connector to torque, then secure the pipe to the shock absorber ring and connect the brake pipe clip.

	Fastening	Component	dia	Value(daNm)
-	Connector	PIPE CONNECTOR TO CALIPER	M10 x 1	1.4

When fitting the hose, check that the retaining block is correctly positioned to prevent the pipe coming into contact with the wheel arch or mechanical parts of the vehicle under any wheel travel or steering conditions.

    Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY.    Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR.