2584626 - 3310A54 front brake discs removed - grind
1. Check the brake disc thickness. If the value measured is below the recommended figure, the disc should be replaced.In the case of deterioration or deep grooves, the surface of the brake disc should be skimmed.After grinding, check that the thickness is within the recommended values. | Measurement | Value | |
|---|---|---|---|
| - | New disc thickness (mm) | 19.9 ÷ 20.1 |
| Measurement | Value | |
|---|---|---|---|
| - | Minimum permissible thickness for wear (mm) | 18.2 |
| Measurement | Value | |
|---|---|---|---|
| - | Minimum permissible disc thickness after refacing (mm) | 18.55 |
