223000118 - 1008b30 GEARBOX SIDE SUPPORT FLEXIBLE MOUNTING(S) - REPLACE

Removing ( Refitting ) Position the car on the ramp.Disconnect the battery negative terminal.

	Name	Connector
-	Battery	See A001 BATTERY

Carry out    Op. 5530B10 BATTERY - R+RCarry out    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R.Carry out    Op. 4450B02 LEFT FRONT WHEEL - R.R.Carry outPosition a lift under the engine and discharge the weight of the power unit from the flexible mounting.1. Undo the nut fixing the power unit gearbox side rigid support to the flexible mounting.2. Undo the fixing bolts (2a) and remove the power unit gearbox side rigid support flexible mounting (2b). Refitting ( Removing ) 1. Place the flexible mounting for the power unit gearbox side rigid support (1a) in its housing., tighten the fixing bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	GEARBOX SIDE RUBBER MOUNT	M10	(Gearbox side) 4.5 ÷ 5.5

2. Undo the nut fixing the gearbox side rigid power unit support to the flexbile mounting to the specified torque.

	Fastening	Component	Ø	Value(daNm)
2	Nut	POWER UNIT GEAR BOX END RIGID MOUNT	M12	(Flexible mounting side) 8.1 ÷ 9.9

Remove the lift from underneath the power unit.Carry outCarry out    Op. 4450B02 LEFT FRONT WHEEL - R.R.Carry out    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R.Carry out    Op. 5530B10 BATTERY - R+RPosition the car on the ramp.Connect the battery negative terminal.

	Name	Connector
-	Battery	See A001 BATTERY

Remove the car from the ramps.