2585292 - 1028H54 piston/cylinder liner - r r

Removing ( Refitting ) 1. Remove the seals (1a) from the piston using the tool (1b).
1. Fit the connecting rod-piston assembly to tool (1a), then use a hydraulic press and tool (1b) to remove pin (1c).
DescriptionCodeFunction
1aSupport1.860.986.000Connecting rod-piston assembly support
DescriptionCodeFunction
1bExtractor/fitting tool2.000.003.500Extracting/fitting piston gudgeon pin
Refitting ( Removing ) 1. Join the connecting rods to the pistons so that the gudgeon pin offset is facing the number stamped on the big end.
1. Fit the gudgeon pin (1a) using the fitting tool (1b) working in the vice with the connecting rod supported by the tool (1c).
DescriptionCodeFunction
-Extractor/fitting tool2.000.003.500Extracting/fitting piston gudgeon pin
DescriptionCodeFunction
-Support1.860.986.000Connecting rod-piston assembly support