2584658 - 3330C30 brake fluid reservoir - r + r and wash inside

Removing ( Refitting ) Open the bonnet.    Op. 3330C40 BRAKE FLUID RESERVOIR CAP - R + R.Draw off brake fluid from the reservoir. Refitting ( Removing ) Fit the brake fluid reservoir and secure by tightening the bolt to the master cylinder. 1. Disconnect the electrical connection from the brake fluid level sensor.
DescriptionConnector
1Brake fluid level sensor (switch)    See K025 BRAKE FLUID LEVEL SENSOR (SWITCH)
2. Unscrew bolt (2a) and remove the brake fluid reservoir (2b) press-fitted to the master cylinder; drain any fluid remaining in the reservoir. 3. Disconnect the hydraulic clutch fluid pipe from the reservoir.
Connect the electrical connection of the brake fluid level sensor.
DescriptionConnector
-Brake fluid level sensor (switch)    See K025 BRAKE FLUID LEVEL SENSOR (SWITCH)
Connect the hydraulic clutch fluid pipe to the reservoir.     Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY.    Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR.    Op. 3330C40 BRAKE FLUID RESERVOIR CAP - R + R.Close the bonnet.