1008A46 TIMING SIDE POWER UNIT RIGID SUPPORT - R.R. - Fiat - DOBLO - eLearn

223000117 - 1008a46 TIMING SIDE POWER UNIT RIGID SUPPORT - R.R.

) Place the car on a ramp. Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.1. Disconnect the flexible recirculation pipe from the rigid section.2. Unscrew the retaining bolts3. Move the engine coolant reservoir to the side.

1. Undo the bolts fixing the power assisted steering pump fluid reservoir mounting.2. Move the assembly aside.

Place an arm lift beneath the engine to support it while removing the mount.1. Undo the nuts fixing the support to the bodyshell.2. Undo the nuts fixing the support to the engine.3. Remove the timing side rigid support.

Refitting ( Removing

) Fit the timing side rigid support, fitting it on the studs on the engine and the bodyshell.Tighten the bolts fixing the rigid engine mount to the cylinder block/crankcase.

	Fastening	Component	Ø	Value(daNm)
-	Nut	ENGINE MOUNT TIMING SIDE	M10 x 1.25	(Bodyshell side) 4.3

	Fastening	Component	Ø	Value(daNm)
-	Nut	ENGINE MOUNT TIMING SIDE	M10 x 1.25	(Engine side) 5

Remove the arm lift under the engine positioned to support it whilst removing the support.Fit the engine coolant reservoir.Tighten the retaining bolts.Connect the flexible recirculation pipe to the section of rigid pipe and secure it using a new band.Fit the power assisted steering fluid pump reservoir complete with mounting bracket.Tighten the bolts retaining the brackets to the body. Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.Remove the vehicle from the ramp.