2584196 - 1032B44 toothed drive pulley - r + r with timing belt removed

Removing ( Refitting ) Arrange a hydraulic jack beneath the engine to support it.Fit the timing side engine mount by screwing in the nuts to the body and engine without tightening.1. Undo the retaining bolts (1a) and remove flywheel guard (1b).2. Position the flywheel lock.3. Undo the fixing bolt (3a) and remove the pulley (3b).

	Description	Code
2	Counter-torque	1.860.898.000

The fixing bolt has a left hand thread.

Refitting ( Removing ) Position the pulley in the special housing on the crankshaft.Tighten the fixing bolt to torque.

	Fastening	Component	dia	Value(daNm)
-	Left hand bolt	DRIVE PULLEY/S TIMING	M16	34

Remove the engine flywheel lock and fit the flywheel guard.

	Description	Code
-	Counter-torque	1.860.898.000

Arrange a hydraulic jack beneath the engine to support it.Remove the timing side engine mount by unscrewing the nuts from the body and engine.