5530A10 ALTERNATOR - R+R - Fiat - DOBLO - eLearn

) Place the car on a lift.Disconnect the battery negative terminal. Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R. Op. 4450B04 RIGHT FRONT WHEEL - R.R. Op. 1092G10 SINGLE ENGINE BELT - R.R.1. Undo the top retaining bolt joining the alternator to the reinforcement bracket.2. Undo the lower engine block retaining bolt.3. Remove the rear alternator reinforcement bracket.3. Undo the lower alternator retaining bolt.

1. Open retaining band(1a) and place the rigid power steering pipes (1b) to one side.

Take care not to damage the rigid pipe.

1. Open the protective cover (1a) and disconnect the alternator electrical leads(1b) by undoing nuts (1c).

	Name	Connector
1b	Alternator	See A010 ALTERNATOR

2. Undo the bottom bolt (2a) and remove the alternator (2b).

) Fit the alternator in its housing and connect the electrical leads. Secure leads using the nuts.

	Name	Connector
-	Alternator	See A010 ALTERNATOR

	Fastening	Component	Ø	Value(daNm)
-	Nut	ALTERNATOR ASSEMBLY	M8	(recharging cable B+) 2.4

Close the protective cover for the alternator connections.Tighten the lower alternator retaining bolt.

	Fastening	Component	Ø	Value(daNm)
-	Nut	ALTERNATOR ASSEMBLY	M12 x 1.25	(lower bolt) 7

Fit the power steering rigid pipe and secure it to the retaining band.Tighten the upper alternator retaining bolt.

	Fastening	Component	Ø	Value(daNm)
-	Nut	ALTERNATOR ASSEMBLY	M10 x 1.25	(upper bolt) 5

Position the rear alternator reinforcement bracket and tighten the retaining bolts. Op. 1092G10 SINGLE ENGINE BELT - R.R. Op. 4450B04 RIGHT FRONT WHEEL - R.R. Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.Connect the negative battery terminal and rmove the vehicle from the lift.